Author Topic: OSR Compliance  (Read 1471 times)

0 Members and 1 Guest are viewing this topic.

Offline nicko

  • Newbie
  • *
  • Posts: 20
      • Nicko Brennan :: Mini Transat 2007
OSR Compliance
« on: March 22, 2007, 07:51:56 AM »
Just reading thru the English Guide Mini and seen this
Quote
OSR 2006 says
Quote
3.02.2 Centreboard and daggerboard trunks and the like shall not open into the interior of a hull except via a watertight inspection/maintenance hatch of which the opening shall be entirely above the waterline of the yacht floating level in normal trim.
3.02.3 A canting keel pivot shall be completely contained within a watertight enclosure which shall comply with OSR 3.02.2. Access points in the watertight enclosure for control and actuation systems or any other purpose shall comply with OSR 3.02.1.

I'm a bit confused - does this mean the keel box does or doesn't need a waterproof cover?

nicko
Nicko Brennan
Rafiki - AUS419
http://nickobrennan.com

Offline andyd

  • Newbie
  • *
  • Posts: 45
      • Aussie-Atlantic-Alone
Re: OSR Compliance
« Reply #1 on: March 22, 2007, 12:36:16 PM »

Does need a cover...
The same as all offshore keelboats.. some of which secure a 'boot' round the box and upper part of keel..

AndyD
aus 116
116

Offline NicoG

  • Administrator
  • Hero Member
  • *****
  • Posts: 2005
      • minitransat650.com
Re: OSR Compliance
« Reply #2 on: March 22, 2007, 18:02:45 PM »
OSR really wants a box cover, minis stil can use plastic/rubber cover. Thank god.